Themo supports different floor temperature sensors available on the market. To show correct temperature values the correct sensor type must be selected. Themo automatically selects a sensor value it assumes to be correct during the configuration process, however it is possible to adjust this if needed.
| Note! Selecting wrong temperature sensor type can cause overheating of your floor. |
Open the Themo mobile app on your mobile device.
1. From the Dashboard select the device for which you want to change the sensor type.
2. Click on the Settings icon on the top right corner to open the settings.
3. Click on Configure device and select Floor Sensor Type. Select the correct value, and tap on Save.
| Note! Changing the Temperature sensor value will reset the thermostat's learning process and it may take a few days for it to adjust to the new settings. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article